> ## Documentation Index
> Fetch the complete documentation index at: https://docs.dialogshift.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Phone AI Call Forwarding: Fallback to an Internal Extension

> Set up your phone system so that calls go to an internal extension when the DialogShift number of the Phone AI does not answer.

In [call forwarding](https://docs.dialogshift.com/en/phone-ai/call-forwarding-integration.md) mode, the hotel's phone system passes calls on to the DialogShift number of the Phone AI. If that number rejects the call, for example because of a carrier outage or a block, or does not answer within 15 seconds, the call goes to an internal extension. You set this up in your phone system, not at DialogShift.

## Setup in the phone system

1. Set up the forwarding to the DialogShift number in the phone system itself, not as a diversion in the carrier's network. Only then can the phone system see whether the call arrives. **CLI no screening** stays active.
2. Set the fallback extension as the destination for busy, unreachable, and error.
3. Set the fallback extension as the destination for no answer after 15 seconds.
4. Check that the fallback extension never routes back to the main number or to the Phone AI.

## Test the fallback

The easiest way to test both cases is to use a mobile phone without voicemail as a temporary forwarding destination:

* If you reject the call, the fallback extension rings immediately.
* If you do not answer, it rings after 15 seconds.

Afterwards, set the destination back to the DialogShift number.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.